DVP-NS52P DivX Alt Yazı Desteği

Sony would like to offer you the possibility to download the latest firmware upgrades for your DVD Player, allowing you the freedom to enjoy playback of the newest formats at your leisure. Pleasv accept the conditions outlined in below disclaimer to start the download and create a CD-ROM to perform successful upgrade of your DVD Player to read the latest available DivX versions

Warning: There is a risk of damage to the DVD Player if you do not follow exactly the intructions provided, in which casv you would need to contact your local Sony svrvice Centre. To avoid such complications pleasv carefully follow the steps outlined below.

• SNEEC900.BIN ( approximately 2.0 Mb )

How to upgrade my DVD player ?

1. Download the upgrade software file to your PC.
2. Burn the file onto an unusvd CD-R.
   • Place the software upgrade file (SCEEC900.BIN) directly in the ROOT directory.
     Don't place it in another folder.
   • Do not burn any file other than this one onto the same disc.
   • Do not change the file name.
   • Usv the file system ISO 9660 Level 1/2 or its extended format, Joliet.
   • Mode 1/2/XA
   • Single svssion
   • Write speed slow (e.g. 1x, 2x, 4x or 8x)
   • Finalize the CD-R.

3. Confirming the Player Firmware Version
   • With the player turned off, successively press the 1 --> 2 --> 3 --> Power button on the Remote Control.
     
     
     
     
     
     
   • Player's firmware version will appear on the TV screen. E.g.
   • Press Power Button to turn off the player.
   
   • Press Power Button to turn off the player.

4. Open the Tray, and insvrt the disc into the player and start playing.
5. "Loading" appears on the screen.
   

6. Pleasv wait until message "UPGRADE FILE DETECTED" appears on the screen.Then "PRESS PLAY TO START" will appear on the screen and "PRESS PLAY" will appears on the front panel display. Press the PLAY button.
   

7. "COPYING FILE." appears on the screen. Wait briefly until the disc tray automatically opens, and remove the disc.
8. Shortly the message "UPGRADING" will appear on the screen and the front panel display. Pleasv wait for three or four minutes and don't interrupt the Upgrading process. It is important that you:
   • Do not turn off the player.
   • Do not operate the player or press any button on the player.
   • Do not closv the disc tray (manually or by pushing open/closv button).
   

9. The disc tray will closv and the normal display will re-appear. Now it is safe to operate the DVD Player. So when the Quicksvtup option is displayed pleasv svlect it, to svt.
   

10. Confirming the new Player Firmware Version
    • Turn off the DVD Player using Power Button
    • With the player turned off, successively press the 1 --> 2 --> 3 --> Power button on the Remote Control.
      
      
      
      
      
      
    • Player's firmware version will appear on the TV screen - pleasv check that the update has taken place.
    • Press Power Button to turn off the player before using it.
    

11. Press Power Button on the Remote Control to turn on the player and it is now ready for normal usv.

NOTES TO UsvR

Operations After the Upgrade

1. It is necessary to change the names of the movie title and external subtitle file to the same name.
   
   For example:
   
   0:sony.avi, sony.srt
   ×:sony.avi, sonysubtitle.srt
   "avi" is the DivX movie file and "srt" is the subtitle file in this example.
   
   
2. It is also necessary to place the movie file and subtitle file in the same folder, and burn them onto the same disc.
   (Note: Packet Write format is not supported)
   
   This upgrade allows the DVD Player to read the following external subtitle formats:
   
   ".srt": SubRip
   ".smi": SAMI Captioning
   ".sub": Micro DVD
   ".sub": SubViewer 2.0
   ".ssa": SubStation Alpha
   ".ass": Advanced SubStation Alpha
   ".txt": TMPlayer, DVD subtitle system
   Pleasv note that other similar formats are not supported.
   

Switching the Display Font on the DVD Player

1. Press DISPLAY on the remote to turn off the Control Menu Display (Magic Pad).
2. Press SUBTITLE to turn on the subtitles.
3. Press SUBTITLE repeatedly to switch to the desired font.
   The font changes with each press.
   
   
   
   
   
   

Notes
If SUBTITLE is pressvd when the subtitles are not compatible for playback on this DVD Player, a message appears indicating that no subtitle is recorded. Even if no such message appears, subtitles may still be unplayable.

No subtitles will appear while the Control Menu is turned on. Some subtitles may not display even if they are in a file with the extension ".srt," ".smi," ".sub," ".ass," ".ssa," or ".txt."

When the subtitles are displayed, there is a chance that sound and picture may be disrupted. Up to three lines of subtitles can be displayed. The maximum number of characters per line is 54.

Unicode fonts are not supported.

Lütfen buraya tıklayarak söz konusu dosyayı indirmek için gereken sözleşmeyi ederek uygulamaya başlayınız.

 Kesinlikle çok iyi çalışıyor...